Operation & Maintenance Manual──LG946L Wheel Loader
24
6 SAFETY OPERATION
6.1 Keep Good Operation Habits
z Always be seated with the safety belt locked during
operation (if assembled). The machine in operation
should always be controlled by the operator.
z Operate the control handle of the working equipment
properly to prevent misoperation.
z Examine and listen to the exceptions carefully, and
report immediately. Do not repair while in operation.
z An overload is dangerous. Shandong Lingong
Construction Machinery Co. Ltd assumes no
resposibility for the injury or damage induced by
overload.
z It is dangerous to hit any object at a high speed.
Damage may be done to the loaders, the goods and the
operator.
z Keep perpendicular during loading and unloading
materials. If working in a side direction, the steering
cylinder and differential carriers may be damaged, and
the machine may be unbalanced.
z Confirm the ambient conditions and the operation
before driving to load and unload materials.
z Check the status of the working area before entering a
narrow passageway such as tunnel, overbridge and
garage. Take care with the working devices during
operation.
To Next Page
Loading...
Need help?
General
