Operation & Maintenance Manual──LG946L Wheel Loader
40
z Contain the oil vented from the machine in a container; never dump the oil directly onto the
ground.
z Obey the relative rules and laws when dealing with harmful materials such as grease, fuel,
coolant, solvent, filter and storage battery.
9 SAFETY TRANSPORTATION
9.1 Assemble and Disassemble the Machine
z The danger always occurs when assembling and disassembling the machine. So keep the
engine speed low during loading and unloading the machine.
z Load and unload machine on level ground and remain at a safe distance off the road.
z Secure the tires well during loading and unloading the machine to make sure it will not
move. Put a cushion under the gangway.
z Slope boards should be strong enough with sufficient length and width to form a safe slope.
The angle with the ground should not be larger than 15°. Keep a safe distance between
slope board and board, board and machine.
z Make sure the height of the two sides of the board is uniform to ensure firm orientation.
z Keep the board surface clean, free of lubricant, oil, ice and loose materials. Clean the dirt off
the tires.
z Never turn around on the slope board. If it is necessary, turn outside the board and then
drive back.
z Lock the direction mechanism after assembly, wedge the tires and tie the machine tightly
with cords.
9.2 Transportation on the Ground
z Obey the rules about weight, height, width and length prescribed by national and local laws
for transporting the machine using a tow truck. Obey the traffic rules.
z Know the weight, height, width and length of machine regulation before deciding the
transport routine.
z Know the allowed limit of weight bearing when passing bridges or private buildings. Obey
the relative rules when driving on the public roads.
z The machine may be unloaded when using other transportation. Please contact Shandong
To Next Page
Loading...
Need help?
General
