Operation & Maintenance Manual──LG946L Wheel Loader
70
△
! WARNING
z Never turn suddenly or turn on a slope at high speed.
z The machine can not turn if the engine stops.
3.3.4 Braking
z Never put your foot on the brake pedal unless necessary.
z Never press the brake pedal again and again unless necessary.
z Never try to stop the engine and put speed change control level in the neutral position while
driving down sloping ground.
z Never using left brake pedal (if assemble the double brake pedals) when driving on a slope
to prevent power from cutting off.
△
! WARNING
Never use the brake valve manual control handle (or
parking brake switch) to brake or slow the speed of the
machine while running unless in an emergency.
3.4 Stopping
3.4.1 Steps to Stop
z Release the accelerator, and press the brake
pedal to stop the machine. Put the gear control
lever in the neutral position.
z After safely stopping, pull the brake valve
manual control handle up or press the parking
brake switch to lock the parking brake in the
brake state.
z Level the bucket and other work equipment to
the ground.
z Stop the machine on the level ground where there
is no danger of stone falling, coasting or flooding.
If it is necessary to stop the machine on a slope,
To Next Page
Loading...
Need help?
General
