Operation & Maintenance Manual──LG958L/LG959 Wheel Loader
16
3.3 Mounting and Dismounting
z Check the handrails and pedals, and if there is oil, lubricant or dirt, clean them first to prevent
slippage. Repair the broken items and fasten the
loose nuts.
z Never jump on or off the machine. Never get on or
off a moving machine.
z When getting on or off the machine, face the machine and use the
handrails and pedals to ensure that you can support yourself. Keep at
least three-point contact (two hands/one foot or two feet/one hand)
with the handrails and pedals to ensure body stability.
z Never hold any control levers when getting on or off the machine.
z Never get into the operator cab from the ladder at the back of
machine or get off from the wheel at the side of operator cab.
z Never hold any tools or other items when climbing up and down the loader; lift the tools needed
to the operation flat roof by rope.
3.4 Fire Prevention
The following fluids are flammable and must be kept away from high heat and fire engine: fuel and
lubricant for loader engine, hydraulic oil for hydraulic system, hydraulic pressure shafting oil and
gear oil for transmission system, brake fluid and antifreeze fluid for heat elimination system.
Observe the following:
z Keep fire away from flammable fluids.
z Add refueling and lubricating oil in well-ventilated
areas. Stop the engine and no smoking or fire while
refueling.
z Tighten all fuel and oil tank caps firmly.
z Put the above flammable liquids in containers with
relevant tags and put in a separate, proper place for
storage. Do not allow unauthorized people to use.
z Electric welding and flame cutting is not allowed for the tubes containing flammable fluid. Clean
the tubes with nonflammable fluid before electric welding and flame cutting.
To Next Page
Loading...
Need help?
General
