Operation & Maintenance Manual──LG958L/LG959 Wheel Loader
78
z Use the ladder and handle to climb down facing the loader. Never jump down.
z Check whether there are particle-likes materials on the engine. If so, clean them immediately to
prevent fire.
z Clean all the flammable materials around the machine to prevent fire.
z Lock the door and window, and draw the key.
3.4.4 Do the Followings after Work Everyday
z Check the fuel reserves.
z Check the oil level of the engine oil pan and its cleanness. If the oil level is too high or diluted,
find the reasons and solve them.
z Check the oil pipes, water pipe, gas pipe and other parts for leaking conditions.
z Check the gearbox, torque converter, steering unit, fixing of front and rear frame, and sealing
conditions. And check whether there are overheating conditions.
z Check whether the rim bolts, transmission axis bolts and other pins are loose.
z Check whether the work equipment is in good working order.
z Check the appearance and the pressure of the tire to see whether it is normal.
z Add liquid oil to the adding points of work equipment.
z Check the quantity of the brake oil by opening the oil bowl cover of the brake booster pump.
z Drain the water in the air tank from the water outlet valve.
z Clean the outside surface of machine and the inside of the bucket.
3.5 Operations
3.5.1 Prepare to Work
Clean the working area, and fill-up any hollow spaces. Clear away the sharp stones and roadblocks
that may break the wheels and operation.
3.5.2 Modes of Work
(1) Loading Operation
z Work together with a truck which can help improve working efficiency especially for long
distance transportation.
z When working together, the loader digs the material and the truck transports and unloads the
material.
There are generally two loading and unloading ways:
z Cross Load:
The loader faces the material, then it moves backward
To Next Page
Loading...
Need help?
General
