Need help?Do you have a question about the SE International Inspector USB and is the answer not in the manual?
General| Model | Inspector USB |
|---|---|
| Radiation Detected | Alpha, Beta, Gamma, X-ray |
| Measurement Range | 0.001 to 100 mR/hr (0.01 μSv/hr to 1 mSv/hr) |
| Operating Range | 0.001 to 100 mR/hr (0.01 μSv/hr to 1 mSv/hr) |
| Accuracy | ±15% |
| Outputs | USB |
| Data Logging | Yes |
| Software | Software included for data logging and analysis |
| Power Supply | USB power |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Software Compatibility | Windows |
Lists essential safety and handling guidelines for the Inspector device.
Provides step-by-step instructions for powering on and initializing the Inspector.
Provides instructions for performing timed counts and calculating averages.
Guides on measuring and establishing baseline background radiation levels.
Discusses the importance and methods of instrument calibration.
Provides instructions for installing the companion software.
Guides on establishing a USB connection between the Inspector and a PC.
Details how to use the software to log and retrieve measurement data.
Details how to activate and configure software-based alarms.
Explains the purpose and importance of instrument calibration.
Details the procedure for calibrating the instrument's pulse counting.
Explains the use of pre-programmed isotope efficiencies for activity calculation.
Presents a chart of common issues, their causes, and solutions.
Explains the formula and process for converting CPM to mR/hr.
To Next Page