Sea & Sea YS-60 TTL User Manual

Lists critical safety warnings and precautions for operating the underwater strobe to prevent injury or damage.

Details safety measures for storing the strobe to prevent damage from moisture, heat, or battery leakage.

Instructions on how to properly remove the O-ring for thorough inspection before use.

Guidance on checking the O-ring for damage like scratches or cuts that could compromise waterproofing.

Ensures the O-ring, groove, and contact surface are free from contaminants like dust, sand, or hair.

Explains the importance of silicone grease for O-ring protection and proper application.

Advice on how to fit the O-ring correctly to avoid damage or loss of sealing capability.

Details on compatible battery types and the process for installing and replacing batteries.

Step-by-step instructions for safely and correctly mounting and exchanging the strobe's batteries.