CONTROLS
TYPE OF KEY IS DISPLAYED HERE
Message possibilities:
– NORMAL KEY
– LEARNING KEY
– RENTAL KEY.
The SEA-DOO learning key or
rental key, limits the speed of the
watercraft and the engine torque,
therefore enabling first time users and
less experienced operators to learn
how to operate the watercraft while
gaining the necessary confidence and
control.
The learning and rental modes also
offer the possibility of setting the ma-
ximum speed of the watercraft.
Refer to
OPERATING MODES
subsec-
tion for details.
4) Throttle Lever
The throttle lever on the RH handle-
bar electronically controls the engine
speed.
To increase or maintain watercraft
speed, pull on the throttle lever with
your finger.
To decrease watercraft speed, release
the throttle lever.
smo2009-002-201_a
TYPICAL
1. Throttle lever
2. To accelerate
3. To decelerate
The throttle lever is spring loaded and
should return to rest position (idle)
when not pressed.
5) iBR Lever (intelligent
Brake and Reverse)
The iBR lever on the LH handlebar can
electronically command:
– Reverse
–Neutral
–Braking.
NOTE: A minimum of 25% lever travel
is required to activate iBR functions.
smo2011-003-020_a
TYPICAL - iBR LEVER
1. iBR lever
2. Lever rest position
3. 25% stroke required to activate iBR function
4. Operating range
At speeds below 8km/h (5 MPH),
pulling the iBR lever in will engage re-
verse.
NOTE: If water current is 8 km/h
(5 MPH) or above, the reverse can
not
be engaged as the speed threshold for
the reverse is exceeded.
_______________
47
To Next Page
Loading...
Need help?
General
