Need help?Do you have a question about the Sea Ray 175 Sport and is the answer not in the manual?
General| Seating Capacity | 8 |
|---|---|
| Horsepower | 135 hp |
| Max Horsepower | 135 hp |
| Length Overall | 17'6" (5.33 m) |
| Draft | 3' |
| Fuel Capacity | 21 gal. |
| Engine | MerCruiser 3.0L |
| Dry Weight | 2, 100 lbs (953 kg) |
Explains the Owner's Manual Packet contents, including the manual and OEM information.
Details information provided by component manufacturers for the boat's systems.
Covers manual content, owner duties, information sources, and dealer responsibilities.
Explains warranties, hull ID, and manufacturer certification standards.
Provides contact details for service, repair, and general inquiries.
Summarizes the key provisions of the Sea Ray limited warranty for your boat.
Explains safety labels and warns about carbon monoxide hazards.
Lists minimum safety equipment and fire safety procedures.
Stresses emergency preparedness, medical aid, water rescue, and fire safety.
Covers navigation, weather safety, and general safe operation practices.
Covers procedures for docking, lifting, trailering, and passenger safety.
Describes the propulsion system and provides guidance on propeller selection.
Identifies gauges, switches, and explains operation of major controls.
Provides comprehensive checklists for preparation and trailer safety.
Details crucial safety precautions for fueling and boarding the boat.
Covers safe engine starting, operation, and passenger instructions.
Explains bilge components, drain plug importance, and pump/blower safety.
Stresses regular maintenance for engine and stern drive, including impact procedures.
Guides on selecting and safely installing the boat's propeller.
Describes fuel system parts and the anti-siphon valve function.
Outlines all essential safety guidelines for fueling operations.
Explains the DC system, battery safety, and maintenance practices.
Covers ignition protection, fuse identification, and wiring inspection.
Details navigation lights and explains electrolytic corrosion and zinc anodes.
Shows accessory locations and discusses canvas safety and carbon monoxide hazards.
Provides tips for canvas installation and advises removal before trailering, plus care instructions.
Provides a summary guide for regular inspection, service, and maintenance intervals.
Details inspection procedures for critical boat systems.
Provides checklists for winterization and fitting out after storage.
Discusses hull maintenance, gelcoat care, cleaning agents, and stain removal.
Covers care for docked boats, bottom paint, and bilge area upkeep.
Details care for fittings, panels, canvas, upholstery, and acrylic plastics.
To Next Page