Do you have a question about the Sea Ray 190 Sport and is the answer not in the manual?
Dry Weight | 2, 800 lbs |
---|---|
Seating Capacity | 8 |
Engine Options | MerCruiser 4.3L MPI |
Deadrise | 19 degrees |
Length Overall | 19' 2" |
Draft | 34" (86.4 cm) |
Details the Sea Ray Owner's Manual content and its importance for operation and safety.
Provides specific information for your particular boat model, complementing the main manual.
Contains information from individual equipment manufacturers installed on your boat.
Outlines the content of the owner's manual and its role in providing safety and operational information.
Details the owner's duties for safe operation, including courses and proper handling.
Explains safety symbols and precautions to be observed during operation and servicing.
Lists resources for boating courses and information, including contact details.
Defines the dealer's role in predelivery, demonstration, and providing warranty information.
Explains the various warranties covering the boat components and systems.
Identifies the HIN location and its importance for correspondence and orders.
States compliance with Federal Boat Safety Act and NMMA certification standards.
Advises on proper preparation, service, parts, and repair procedures through authorized dealers.
Lists international standards and authorities relevant to boat construction and specifications.
Guides owners on where to find warranty details and what to do if information is missing.
Summarizes the Sea Ray Express Limited Warranty, covering defects and exclusions.
Provides guidelines on safe passenger distribution and factors affecting boat stability to prevent accidents.
Details the boat's maximum capacity and warnings against exceeding it to prevent capsizing or sinking.
Explains the four design categories for boats based on wind and sea conditions, identifying the boat's category.
Illustrates the placement and meaning of various safety labels found on the boat.
Defines symbols used on controls, gauges, and within the manual for clear understanding.
Provides key dimensions, clearances, and specifications for the 190 Sport boat.
Identifies the function and position of various through-hull fittings on the boat.
Details the layout of the helm, including instruments, controls, and switch panels.
Illustrates the arrangement of various components and features on the boat's deck.
Explains the proper use of cleats, lifting points, and considerations for boat storage.
Describes the types and functions of navigation and anchor lights, including bulb replacement.
Shows the arrangement of components within the boat's bilge area, such as pumps and switches.
Covers the importance of engine maintenance and refers to the engine manufacturer's manual for details.
Details the gasoline fuel system, venting, recommendations, and precautions for ethanol-blended fuels.
Explains the operation of automatic and manual fire suppression systems and safety procedures.
Describes the boat's audio system, including standard and optional features.
Lists available canvas options such as bimini tops and covers.
Covers battery selection, installation, and recommended types for optimal starting and accessory power.
Emphasizes ignition protection for engine compartment components to prevent sparks in gasoline environments.
Explains the function of the battery switch for isolating power and safety, and when to turn it off.
Details the purpose of the selector switch for managing battery usage and maintaining a spare.
Describes how DC power is distributed from batteries to circuit breakers and fuse blocks.
Provides guidance on replacing fuses and breakers, stressing the importance of using the correct amperage rating.
Explains the use and connection of an optional on-board battery charger for maintaining battery charge.
Refers to electrical schematics and wiring diagrams for technical reference, recommending professional service.