To Next PageTo Next Page
Need help?Do you have a question about the Sea Recovery Aqua Whisper DX 450-1 and is the answer not in the manual?
General| Model | Aqua Whisper DX 450-1 |
|---|---|
| Voltage Frequency | 50/60 Hz |
| Water Source | Seawater |
| Warranty | 1 year |
| Operating Pressure | 800-1000 psi |
| Feed Water TDS | Up to 45, 000 ppm |
| Production Capacity | 450 GPD |
| Pump Type | High Pressure |
| Membrane Type | Thin Film Composite |
| Product Water TDS | Less than 500 ppm |
| Fresh Water Production | 450 gallons per day |
Covers copyright, terms of use, patent information, liability notice, and trademarks.
Disclaims warranty and liability for information within the manual. Subject to change without notice.
Explains manual purpose, terms used, references, and graphics.
Emphasizes reading and complying with instructions for safe operation.
Explains the meaning of warning, caution, and note symbols used in the manual.
Lists available models and directs to detailed system specification information.
Details compliance with ABS, FCC, and European CE standards.
Outlines the product warranty, coverage, and recommendations for parts.
Covers storage, chemical handling, and technician qualifications for safe installation.
Details electrical requirements, ensuring sufficient sizing for voltage and cycles.
Lists installer-supplied water connection parts and cautions for proper installation.
Illustrates system interconnection configurations for standard and optional accessories.
Details electrical requirements, motor specs, circuit breakers, and wire sizes.
Provides cross-reference between American Wire Gauge (AWG) and metric wire sizes.
Covers modular model electrical information and wiring diagrams.
Guidance on placing the system controller box for accessibility.
Provides instructions for mounting system components securely and accessibly.
Covers tubing precautions, water tank requirements, and interconnecting components.
Details connections for remote touch screen, electrical, and land feed water pick-up.
Provides instructions for installing the UV sterilizer unit.
Covers commissioning notes, installation checks, RO membrane check, and controller setup.
Details manual system checks and operational notes for startup.
Outlines initial startup, system shutdown, and important warnings for new systems.
Describes automated operational sequences, system warnings, and cautions.
Covers daily operation, system storage, and short-term shutdown procedures.
Details winterizing procedures and RO membrane cleaning methods.
Outlines safety, qualifications, precautions, and maintenance intervals.
Guides on maintaining and repairing individual system components.
Provides procedures for maintaining the UV sterilizer unit.
Explains alarm and error screens and recommended corrective actions.
Details common problems and symptoms related to system components.
Guides on troubleshooting electrical circuits, components, and the touch screen.
Provides information required when ordering parts or accessories.
Identifies various types of tubes and fittings used in the system.
Lists and illustrates major assemblies like Sea Strainer, Booster Pump, and HP Pump.
Presents schematic diagrams of the system's process flow.
Provides electrical wiring diagrams for various system configurations.
