up to 2,3 H x 3 L mup to 2,3 H x 3 L m
CORONA 60CORONA 60
up to 2,3 H x 4 L mup to 2,3 H x 4 L m
CORONA 110CORONA 110
up to 2,7 H x 3 L mup to 2,7 H x 3 L m
CORONA 60CORONA 60
up to 2,7 H x 4 L mup to 2,7 H x 4 L m
CORONA 110CORONA 110
MAX DOORMAX DOOR
DIMENSIONS DIMENSIONS
up to 2,4 H x 3,5 L mup to 2,4 H x 3,5 L m
CORONA 60CORONA 60
up to 2,4 H x 5 L m up to 2,4 H x 5 L m
CORONA 110CORONA 110
OPERATORS FOR BALANCED OVERHEAD DOORS WITH SPRINGS
OPERATORS FOR COUNTERBALANCED OVERHEAD DOORS
OPERATORS FOR SECTIONAL GARAGE DOORS
FITTING AND CONNECTION INSTRUCTIONS
Corona S is a non quick grafting operator with aluminium guide.
Corona RP is a quick grafting operator with steel guide.
Corona S/RP is a ceiling actuator easy to install and noiseless
thanks to the slowdown in the last phases of opening and closing.
It is provided with an electronic speed control which allows the
mechanical parts subjected to stress to be saved.
The anticrushing safety is assured by an electronic system
which, set during installation, stops the door in opening and
reverses during closing phase.
Corona S/RP irreversibility avoids the use of electro-locks while
guaranteeing maximum security during forcing attempts.
A Manual Release ensures door operation also in case of power
failure.
ENGLISH
MAIN PARTS OF THE CORONA S OPERATOR
MAX DOORMAX DOOR
DIMENSIONS DIMENSIONS
MAX DOORMAX DOOR
DIMENSIONS DIMENSIONS
Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
®
CORONA 60 CORONA 110 CORONA 60 110V CORONA 110 110V
230 V (±5%) 50/60 H 110 V (±5%) 50/60 H
24 V
140 W 370W 140 W 370W
adjustable
60% 40% 60% 40%
-20°C + 60°C
13 kg 14 kg 13 kg 14 kg
600 1100 600 1100
600 1100 600 1100
IP 20
electronic
Miicro switch
TECHNICAL DATA
Power Supply
Motor Supply
Power
Opening Speed
Frequency of use
Operating temperature
Weight
Max Pushing (N)
Max Traction (N)
Protection degree
Anticrushing clutch
Limit switch
Note: The frequency of use is valid only for the first hour at an
outside temperature of 20°C .
CORONA S/RP
Fig. 1
140
2
0
5
385
Fig. 2
DIMENSIONS (mm)
67410622 Rev 00 - 02/2012
11
To Next Page
Need help?
General
