To Next Page

G44 Quick Start Manual

SD-MA-026 V02

Note

1. Do not fix the device to any surface which is a heat source to avoid over heating

2. Do not cover the surface or ventilation grills of the device to avoid over heating

1. Verify the package contents

Please verify the package contents against the List Below

1. G44 Controller x1

2. Power Supplier x1

3. Software & Documentation User CD x1

4. Serial Cable x1

5. Network Cable x1

6. Remote Control x1

7. Ground Wire x1

8. Connectors

• Phoenix x8

• DVI to HDMI x2

• DVI to VGA x2

• DVI to RCA x2

2. Set up the G44

Power up the G44 controller and connect the input and outputs to correct devices.

Figure 1

3. Run the software on control PC

Users can run the G44.exe software directly without installation. G44

requires password authentication (default password for Administrator

is: 111111)

4. Connect through Serial Port

Connect the device with a serial cable. Select the COM port from the Port dropdown

menu (there should only be one COM port if you have connected the device to the

laptop). Press on the button to the right of “Status” it should switch to connected if the

unit is recognized correctly

Model: G44-DVI

1 – Display

2 – Input Buttons

3 – Output Buttons

4 – Function Buttons

Back Panel includes 4 DVI-U Inputs and Outputs,

Ethernet control port, 2x Serial ports and 4 3.5

mm captive screw connectors for audio inputs

and outputs

LCM

Seada G44 User Manual

Questions and Answers: