To Next PageTo Next Page
Need help?Do you have a question about the Seafloor HydroLite-TM and is the answer not in the manual?
General| Accuracy | ± 1cm + 0.1% of depth |
|---|---|
| Operating Frequency | 200 kHz |
| Depth Range | 0.3 m to 75 m |
| Measurement Range | 0.3 m to 75 m |
| Resolution | 0.01m |
| Operating Temperature | -10°C to +50°C |
| Output | RS232, Bluetooth |
Assembling the pole kit and attaching it to the boat for proper orientation and submersion.
Connecting the transducer to the echosounder and ensuring correct positioning in water.
Mounting the GPS antenna on the pole and ensuring clear sky view for satellite acquisition.
Verifying the pole's straightness and transducer's position in water for optimal readings.
Downloading troubleshooting tools from the website for PC-based system issues.
Using SonarMite App and SENA BTerm for basic and advanced Android troubleshooting.
Finding the best vessel location for mounting, ensuring transducer is lowest point.
Positioning the pole straight and noting the transducer draft for accurate measurements.
Maintaining typical survey speed for better sounding logging and area coverage.
Introduction to the app and how to configure system settings before use.
Description of the app's display, layout, and steps for connecting to SonarMite.
Uploading custom style sheets and selecting instrument types within the software.
Setting up the controller port for Bluetooth or COM connections to the echosounder.
Step-by-step process for pairing Bluetooth devices with the Trimble controller.
Changing SonarMite output to NMEA format for parsing metric depth.
Brief instructions for using SCS900 with SonarMite for hydrographic surveys.
Steps to pair SonarMite with Bluetooth devices for connection to SCS900.
Procedure for launching and running the SonarMite software for surveys.
Identifying and selecting the SonarMite device and its assigned COM port in SCS900.
Verifying system configuration by measuring a benchmark point.
Copying SonarMite ESD files to the Trimble Access 'System' directory.
Accessing and navigating the settings menu within Trimble Access.
Finalizing and saving the configured Echo Sounder settings.
Steps to activate the Depth Sounder in SurvCE settings and configure it.
Overview of connecting Leica Viva controllers to SonarLite/SonarMite via Bluetooth or serial.
Initial steps for setting up the Leica 1200 GPS system with SonarMite.
Configuring ASCII terminal settings for the Leica 1200 GPS system.
Instructions for setting up Topcon GNSS receivers and depth sounders.
Creating or modifying configurations for GNSS and depth sounder setup.
Choosing the appropriate driver for the depth sounder or generic NMEA.
Setting up the COM port, baud rate, and parity for the depth sounder.
