b. Use one hand to support the weight of the PSU and the other to guide it into the empty PSU slot.
c. Exerng even pressure to the center, gently press inward unl it connects with the midplane and it locks in
place.
d. Connect the power cord, then move the PSU power switch to the ON posion.
6. Verify that the PSU OK LED is lit green on the replaced PSU aer properly inserng and seang it in the empty slot.
7. Facing the front of the storage enclosure, verify that the Power On LED is green and there are no fault condions.
To Previous Page
Loading...
