Seakeeper 6 - Control, Cooling, and Safety


INSTALLATION
MANUAL
Product: Document #: Rev: Page:
SEAKEEPER 6 90402 1 7 of 7
Section 1: MECHANICAL INSTALLATION


1.4 Transport and Unpacking
1.4.1 Transport
1) Use a Seakeeper provided shipping crate for transport, part number 10977. Overall
dimensions of a fully packed crate are 40.25”Lx43”Wx40.25”H with a weight of 870
lbs(395kgs).
2) Do not stack Seakeeper shipping crates.
3) Both Air and Ground transport are acceptable.
4) Seakeeper shipping crates must be transported in environmental conditions between
-20°C and 60°C.
1.4.2 Unpacking Crate
1) Reference Seakeeper Drawing No. 90389, Seakeeper 6 Hardware Scope of Supply for
items that ship with the Seakeeper.
2) Remove electrical components, cables, and misc. items and set aside.
3) Remove packing materials that secure Seakeeper assembly inside the crate.
4) Remove top and angled face cover panels to access lifting eyes
5) Attach spreader bar to the two lifting eyes located on the top of the Seakeeper enclosure.
Stay clear of any other parts on the Seakeeper. Seakeeper 6 weighs 395 kg (870 lbs).
See Figure 4 below.
FIGURE 4 – LIFTING ARRANGEMENT