Seal Shield STM042 User Manual

STM042 USER MANUAL
1. Plug the base charger USB cable to the computer USB port, the LED red.
2. The nano receiver plug USB port on the base.
3. Power on switch bottom of mouse, the bottom LED red.
4. Press the mouse bottom opposite code switch “Connect”, comunication with receiver is OK.
5. If mouse power is deplenished, please take the mouse into the base, keep touch the pin of the
charger base, then the mouse is begin charging .
Warring: User Don’t look the mouse bottom LED directly.

Seal Shield STM042 Specifications

General

Type	Wired
Connection	Wired
Design	Ambidextrous
Color	White
Dimensions	4.5 x 2.5 x 1.5 inches
Connectivity Technology	Wired
Movement Detection Technology	Optical
Number of Buttons	3
Interface	USB 2.0
Cleaning	Dishwasher Safe
Features	Waterproof, Dishwasher Safe
Material	Silicone