Owner’s Manual - Sealweld SuperGun® Content
Page ii
This document is for the purpose of the Sealweld SuperGun® operation only and is not considered a
guide for valve maintenance. We are pleased to offer a valve maintenance program “ValvePro®” and
trust you will find the lessons detailed in this program useful when maintaining the valves at your facility.
Should you have any questions regarding any of the ValvePro® procedures or if you know of any
successful procedures you would like to share, please contact us at:
Sealweld Corporation
# 106, 4116-64 Ave. S.E., Calgary, Alberta, Canada T2C 2B3
Telephone: 1-403-236-0043 Fax: 1-403-236-5487
TOLL FREE 1-800-661-8465
Email: info@sealweld.com
Web Site: www.sealweld.com
Sealweld (USA), Inc.
11430 Brittmoore Park Dr., Houston, Texas, USA 77041
Telephone: 1-713-466-7373 Fax: 1-713-466-7778
TOLL FREE 1-800-624-4301
Email: info@sealweld.com
Web Site: www.sealweld.com
ValvePro® Technical Support
Telephone: 1-403-236-0043 Fax: 1-403-236-5487
Email: support@valvepro.com
Web Site: www.valvepro.com
The information in this manual is intended as a guide only.
Read our Disclaimer on page 29.
Always consult the valve manufacturers recommended maintenance procedures.
Sealweld®, ValvePro® and FLOW WOLF® are registered trademarks and/or patents of Sealweld
Corporation.
MADE IN CANADA
Revised 4/24/2014
To Next Page
Loading...