Need help?Do you have a question about the Seamark ZM ZM-R380B and is the answer not in the manual?
Detailed explanation of the BGA rework station's main components and their arrangement.
Explains the functions and usage methods of each component of the BGA rework station.
Guide to setting temperature profiles for the top heating element using the PV410 controller.
Instructions on connecting and using the device with an external computer for control and data management.
Step-by-step guide for installing the Zhuomao reworker software on a computer.
Instructions on connecting, setting parameters, and operating the BGA rework station via the software.
Step-by-step guide on how to operate the BGA rework station, including startup and welding process.
Detailed instructions for safely replacing the top heating wire, including component identification.
Procedure for replacing the bottom heating panel, including cover removal and component access.
Guidelines for cleaning and maintaining the machine's heat plate and components.
General| Model | ZM-R380B |
|---|---|
| Category | Rework Station |
| Upper heater power | 800W |
| Bottom heater power | 800W |
| Power | 1600W |
| Frequency | 50/60Hz |
| Voltage | AC 220V |
| Bottom preheating area | 280*270mm |
| Weight | 30KG |
To Next Page