Need help?Do you have a question about the Sears, Roebuck and Co. 113.29960 and is the answer not in the manual?
General| Brand | Sears, Roebuck and Co. |
|---|---|
| Model | 113.29960 |
| Category | Saw |
| Language | English |
Understand the tool's applications, limitations, and potential hazards.
Keep work area clean, avoid hazardous environments, and keep children away.
Wear proper apparel, safety glasses, secure work, and follow safe operating practices.
Verify all parts are present and clean any rust-preventive coating from the saw.
Instructions for removing the table insert and positioning it in the saw.
Ensure the saw arbor nut is tightened securely using the arbor wrench.
Level the table insert with the saw table using set screws for a smooth surface.
Ensure the rip fence is parallel to the table grooves for accurate ripping.
Adjust the fence lock and pawl for smooth, secure operation.
Check and adjust fence parallelism to table grooves for accurate cuts.
Setting the indicator scale for accurate cut width measurements.
Set stop collars for precise 0° and 45° blade tilt positions.
Check and adjust the miter gauge for accurate 90° and 45° settings.
Install the splitter blade bracket and the main saw guard assembly.
Mount the motor and adjust belt tension for optimal performance.
Understand controls for elevation, tilt, fence movement, and miter gauge angle.
Identify parts needing lubrication and proper cleaning methods.
Follow safe procedures for removing and installing a new saw blade.
Learn the process of ripping wood with the grain using the rip fence.
Guides for cutting thick boards into thinner ones.
Procedures for cutting wood across the grain using the miter gauge.
Instructions for using a dado head set for creating grooves and dados.
Utilizing the saw arbor for sanding and employing stabilizing washers.
A chart listing common problems, causes, and remedies for the bench saw.
To Next Page