To Next PageTo Next Page
Need help?Do you have a question about the Sears 153 and is the answer not in the manual?
General| Brand | Sears |
|---|---|
| Model | 153 |
| Category | Water Heater |
| Language | English |
Lists materials required for water heater installation, including kits and tanks.
Lists essential tools for water heater installation and optional tools for soldering.
Step-by-step guide to safely disconnect and remove an existing water heater.
Guidelines for selecting a safe and appropriate indoor location for the water heater.
Details requirements for providing adequate air for combustion and ventilation in confined and unconfined spaces.
Instructions for connecting cold and hot water lines, including safety precautions and material recommendations.
Explains the function, installation, and safety requirements of the temperature-pressure relief valve.
Procedures for completely filling the water heater tank before operation to prevent damage.
Guidelines for proper installation and maintenance of the water heater's vent system for safe operation.
Instructions and safety warnings for connecting the gas supply, including pipe types, sediment traps, and altitude adjustments.
A comprehensive checklist to ensure all installation steps and safety checks are completed before lighting the pilot.
Step-by-step guide for safely lighting the pilot light and main burner of the water heater.
How to adjust the water temperature, including safety warnings about scald hazards and temperature variations.
Steps to remove sediment buildup from the tank to prevent premature failure.
Annual inspection guidelines for the venting system to ensure safety and proper operation.
Guidelines for inspecting and cleaning the main and pilot burners for proper operation.
Procedures for draining the water heater for winterization or sediment removal.
Instructions for manually operating the temperature-pressure relief valve annually and replacing its washer.
Recommendations for maintaining the area around the water heater and general service advice.
Addresses issues encountered during initial operation, focusing on thermal expansion.
Explains common noises like sizzling or popping that may occur during normal operation.
Discusses condensation that may appear during heating and cooling cycles.
Information on initial smoke/odor, causes of smelly water, and air in hot water faucets.
Troubleshooting for issues like high temperature shut-off, not enough hot water, or water being too hot.
General information about the warranty terms, limitations, and what is covered.
Specific warranty coverage provided by Sears for installations arranged through them.
Outlines the standards and practices followed by Sears authorized installers.
Information on how to obtain replacement parts, including contact numbers and procedures.
