Sears Vacuum Cleaner - PILE HEIGHT SELECTION AND SETTING; BARE FLOOR SETTING

HEIGHT
SELECTIONAND
SETTING
Toselect a pile height setting:
Turn off the cleaner. Select a pile height setting by
tilting the cleaner back until the front wheels are
lifted slightly off the floor.
Slide the height adjustment lever to the correct
setting.
--High
SUGGESTEDPILEHEIGHT SETTINGS
You may need to raise the height to make some jobs
easier (such as scatter rugs and longer pile carpets).
Suggested settings are:
EX LO or AUTO: very Io pile.
LOW: short or medium pile.
MED: medium to long pile.
HIGH: shag carpet, long pile, plush, scatter rugs.
WARNING
Personal Injury Hazard
DO NOT place hands or feet underneath the unit
when changing from the bare floor setting to the
carpet pile height setting. The brush assembly begins
to revolve rapidly when the vacuum is turned on and
isswitched to a carpet height setting.
FLOOR
SETTING
(OPTIONAL MODEL)
To select the bare floor seffing:
Turn off the cleaner.
Tilt the cleaner back until the front wheels are lifteid
slightly off the floor.
Slide the height adjustment lever to the bare floor
setting,
Inthis position, the headlight is off and the brush
assembly does not revolve. Thissetting isrecom-
mended for cleaning hardwood and tile floors.
LEASINGTHE
HANDLE
Release the
handle by
pressing on
the handle
release
pedal.