INTRODUCTION
I I
This manual gives you the steps needed to install
your new Sears Water Softener. To better under-
stand how the water softener is installed, and to
know what you will need, please read this entire
manual before beginning.
After you have installed the water softener, the
included Owners Manual tells you how to start,
program, operate and maintain it. The owners
manual also has the product warranty, and a
listing of repair parts available from Sears.
Your Sears Water Softener will remove hardness
minerals (measured in grains per gallon...gpg)
and some clear water iron (measured in parts per
million...ppm) from water. See the specifica-
tions, in your owners manual, for the maximum
limits of hardness and iron removal. A water
softener will not improve other water problems
such as acidity, tastes and odors, or iron other
than clear water iron. It will not purify contami-
nated water, or make other unsafe water safe to
drink.
Sears sells a complete line of water treating
equipment to correct various water problems. To
be sure you have the proper type and size
equipment, you must have your water tested.
Your Sears store can give you water test results
for hardness, iron and acidit3_ and tell you what
equipment you need. Simply take at least a 4 oz.
sample of your water to Sears, and they will test
it while you wait. If.you need help to get your
water tested, or if you have other questions
about your water, ask at your Sears store, or call
sears Water Line ...1-800-426-9345.
2
To Next Page
Loading...