SEAS 6000 User Manual

IMPORTANT!
- Mast/tube 50 mm/2” outer diameter and vibration proof
- Free allround sight, no shadows from tunnels a.so.
- Water proof BNC by using vulcanized tape
- Worldwide Digital/Analoque TV-AM-FM reception
- Filter/wavetraps for VHF 156 MHz, AIS 162 MHz, LTE/4G 790 MHz to avoid interference
- Easy to install, no additional parts and no adjustments
DESCRIPTION PART NO
SEAS 6000 (TV-AM-FM) 6000
Sea Systems AB - Terminalgatan 19A - SE 235 39 Vellinge - Sweden
Tel.: +46 40420250 - www.seasystems.se
SEAS 6000_Inst. Manual_Rev. 1.0.pdf
SEAS 6000
TV, AM and FM Antenna
MECHANICAL MEASUREMENTS
Shell and metal base
Ø 50 mm/2” (inner diameter)
20 cm Coaxial cable, RG6
BNC female 75 ohm
450 mm
100
180
263
INSTALLATION MANUAL

SEAS 6000 Specifications

Electrical Specifications

amplifier gain AM	0.1~26.5 MHz >12 dB
band I/FM gain	40~110 MHz >25 dB
VHF gain	170~230 MHz >25 dB
UHF gain	470~890 MHz >25 dB
ALCs output level	95~100 dBuV max.
intermodulation (composite triple beat) CTB	< -60 dBc
return loss	16 dB
noise figure	<4.5 dB
supply voltage	15 VDC (+/-10%)
supply current	app. 200 mA
power consumption	3 W
impedance	75 Ohm

Operating Environment

operation temperature	-40 to +60°C
humidity	100% condensing

Weight and Dimensions

height	260/180 mm
width	450 mm
weight	3.40 Kg and incl. 25m coax cable; 4.80 Kg

Summary

Technical Specification

Antenna Mechanical Specifications

Details physical dimensions, materials, weight, and connector type for the SEAS 6000 antenna.

Antenna Electrical Specifications

Outlines amplifier gain, output levels, noise figure, power consumption, and impedance for the antenna.

Antenna Filter and Wavetrap Frequencies

Lists specific frequency filters (VHF, AIS, LTE/4G) designed to prevent interference.

Installation Contact and Record Keeping

Provides fields for service contacts, installer signatures, and ship names for documentation.