This document is an assembly and user manual for the Oliver Furniture Seaside Lille+ low bunk bed (product number 021254). The manual provides detailed instructions for assembly, important safety warnings, usage guidelines, and maintenance advice for the bunk bed.
Function Description:
The Oliver Furniture Seaside Lille+ low bunk bed is designed as a space-saving sleeping solution, featuring two beds stacked vertically. It is intended for children, with specific safety warnings regarding age suitability and potential hazards. The bed is available in two main configurations: a "Lille+ halvhøj køjeseng" (Lille+ mid-high bunk bed) and a "Lille+ low bunkbed" (Lille+ low bunk bed), as indicated by the product number. The manual illustrates the assembly of the low bunk bed version. The design incorporates a ladder for accessing the upper bunk and safety rails to prevent falls. The bed frame is constructed from wooden components, and the slatted bed bases are designed to support mattresses.
Important Technical Specifications:
The manual lists various components with their part numbers, quantities, and dimensions. Key components include:
- Bed Posts/Frames (e.g., parts 10, 11, 12, 13, 20, 22): These form the main structural elements of the bed. For example, part 20 (curved top rail) has dimensions of 661 x 74 x 18 mm, and part 22 (side rail) measures 661 x 118 x 18 mm.
- Side Rails/Safety Barriers (e.g., parts 65, 66, 67, 68): These are crucial for the safety of the upper bunk. Part 65 measures 1660 x 112 x 42 mm, part 66 measures 1260 x 319 x 24 mm, part 67 measures 1660 x 319 x 24 mm, and part 68 measures 860 x 319 x 24 mm.
- Slatted Bed Bases (part 70): These support the mattresses and measure 1278 x 679 x 27 mm.
- Ladder (part 69): The ladder provides access to the upper bunk and measures 1314 x 400 x 107 mm.
- Small Ladder (part 46): This smaller ladder component measures 358 x 40 x 21 mm.
- Feet (part 50): These are small feet components measuring 75 x 46 x 21 mm.
- Fasteners and Connectors: A variety of screws, bolts, dowels, and other connectors are used for assembly, including H11 (Ø8x30), H1 (Ø8x30), H2 (Ø8x40), D197 (M10x1.5), A280 (M10), D196 (Ø15x14), D262 (Ø15x18), D198 (Ø7x34 M6 SISØ), D223 (Ø7x54), A236 (M6x60), A148 (M6x60), A82 (M6x30), A279 (M6x10), A66 (Ø3.5x25), T10 (Ø4x30), A103 (M6 Ø15x12), D221 (M6), P4 (M6), and A6 (4mm/5mm).
- Mattress Specifications: The mattress thickness should not exceed 150 mm, with a recommended thickness between 100-150 mm. The mattress dimensions must be at least 68 x 168 cm. The top surface of the mattress in the upper bunk must be at least 160 mm below the upper edge of the safety barrier.
Usage Features:
- Age Restriction: The bunk bed is not suitable for children under 6 years of age due to the risk of falls.
- Clearance: No objects that could cause a risk of strangulation (e.g., cords, ropes, wires) should be left in or near the bunk bed.
- Wall Distance: To prevent entrapment, the bed should be placed with a minimum distance of 75 mm and a maximum of 230 mm from the wall.
- Structural Integrity: The bunk bed should not be used if any parts are damaged, broken, or missing. Only Oliver Furniture-approved spare parts should be used.
- Assembly Instructions: The manual emphasizes that all parts and tools should be present before assembly begins. Products should be assembled on a smooth, even surface, using the packaging cardboard as an underlay to prevent damage.
- Ventilation: Newly produced furniture may have a slight odor, which will dissipate over time. Regular ventilation of the room by opening doors and drawers is recommended to speed up this process and ensure optimal air exchange. This also helps prevent high humidity and mold/mildew growth around the bed.
Maintenance Features:
- Cleaning: Painted surfaces are vulnerable and not scratch-resistant. The furniture should be wiped with a dry cloth after cleaning with a damp cloth.
- Liquid Spills: Any spilled liquids should be immediately wiped off to prevent damage and swelling of the furniture.
- Surface Protection: Surface protection (pads or mats) should be used under damp objects. Hot objects should not be placed directly on the furniture.
- Fastener Checks: All fittings and fasteners must be tightened securely and should be checked and re-tightened regularly.
- Regular Inspection: Regular checks of the bed's components are recommended to ensure safety and prevent issues.
The manual is provided in Danish, English, German, and French, ensuring broad accessibility for users. The company information, including address, phone number, and website, is clearly stated for customer support.
Need help?
General
To Next Page