Seat ATECA 2024 - Page 118

116
Air conditioning
Climatronic controls and functions
Fig.89 On the centre console: Climatronic
controls.
Temperature
1
/
2
The temperature of the right and left sides can
be adjusted separately using the adjusters. The
selected temperature is shown on the the cli-
mate control panel display.
Synchronizes the driver’s temperature
settings to the passenger side. Activates
the temperature regulator for the pas-
senger side to set a dierent temperature.
In this mode, the system automatically
regulates the interior temperature, fan
speed and air distribution for optimal
thermal comfort. The mode will deac-
tivate as soon as manual changes are
made to the fan speed, air distribution,
windscreen demisting or air recirculation.
Switches the cooling system on or o.
The cooling mode cools and dehumidi-
fies the air.
The recirculation of air and the cooling
system turn on automatically and air dis-
tribution adjusts automatically to the posi-
tion .
Adjust the fan power.
The defrost/demisting function removes
ice and fog from the windscreen. The air
is dehumidified and the fan is set to high.
Open the air conditioning settings in
the infotainment system ›››page119.
The climate control operation and set-
tings menu will be displayed in the infotain-
ment system display.
The heated rear window only works when
the engine is running and switches o
automatically after a maximum of 10 mi-
nutes. It should be switched o as soon
as the glass is demisted. Lower electricity
consumption has a positive eect on fuel
consumption.
To avoid possible damage to the battery,
the automatic temporary disconnection of
this function is possible, and it comes back
on when normal operating conditions are
re-established.
Switches the air recirculation mode on
and o ›››page119.
Switches seat heating on and o
›››page120.
Switches the auxiliary heater on or o
›››page123.
Switch o the air conditioning system.
If the fan is manually set to
, it also
switches o.