Seat ATECA 2024 - WLAN Access Point; Configuration for Sharing a Connection over WLAN; Configure Internet Access

Data transmissions
225
WLAN access point
1)
Not available in all markets.
WLAN access point
Introduction
The infotainment system can be used to share
a WLAN
1)
connection with up to 8 devices
›››page225, Configuration for sharing a
connection over WLAN.
The infotainment system can also use the WLAN
hotspot of an external device to provide Inter-
net to the devices connected to the hotspot
(WLAN client) ›››page225.
Note
●
There may be a charge for the required
data transmission. Due to the high volume of
data exchanged, SEAT recommends the use
of a flat rate tari for data transmission. Mo-
bile phone operators can provide information
on this. You can also purchase data plans for
your vehicle on the Cubic website:
https://seat.cubictelecom.com
●
Exchanging data packages and purchas-
ing them from third parties may generate
additional costs, depending on your mobile
phone rate, particularly if you are abroad
(for example, roaming rates).
Configuration for sharing a connec-
tion over WLAN
Establishing the connection with the wire-
less network (WLAN)
●
Press the HOME > button.
●
Activate the wireless network. To do this, press
the function button Wi-Fi > Infotainment sys-
tem as hotspot.
●
Activate the wireless network (WLAN) on the
device that is to be connected. If necessary,
refer to the manufacturer’s instruction manual.
●
Activate the mobile device assignment in the
infotainment system. To do this, press the func-
tion button Use as hotspot and check the
checkbox.
●
Enter and confirm the network key displayed
on the device.
The following adjustments can also be made in
the Infotainment system as hotspot menu:
●
Security level: With WPA2/WPA3 encryption,
a network key is automatically generated.
●
Network key: Network key generated auto-
matically. Press the function button to change
the network key manually. The network key
must have at least 8 characters and a maxi-
mum of 63.
●
SSID: Name of the WLAN network (maximum
32 characters).
The WLAN (wireless) connection is established.
To complete the connection, it may be neces-
sary to enter other data into the device.
Repeat this process to connect other devices.
There is also the option of scanning the QR
code to connect the device directly to the info-
tainment system’s Wi-Fi network without having
to enter the password: select Settings > Wi-Fi >
Quick connection to infotainment system.
Configure Internet access
The infotainment system can use the WLAN hot-
spot of an external device to establish an Inter-
net connection.
Establishing the connection with the wire-
less network (WLAN)
●
Activate and share a wireless hotspot with In-
ternet on the external device. Refer to the man-
ufacturer’s instruction manual.
●
Press the HOME > button.
●
Press the Wi-Fi > Connect to Wi-Fi menu and
put a check in the checkbox.
●
Press the Search for Wi-Fi button and select
the device you want from the list.