Seat ATECA 2024 - Operation Using the Multifunction Steering Wheel

32
Driver information
Speed warning system partially deacti-
vated
A white control lamp is shown on the instrument
cluster display. The default configuration of the
speed warning has been changed:
●
Check whether the speed warning is
switched o ›››page29.
●
Check if the audible warning is activated
›››page29.
●
Check if the default warning threshold has
been changed ›››page29.
Instrument cluster opera-
tion
Introduction
With the ignition switched on, it is possible to
read the dierent functions of the display by
scrolling through the menus.
In vehicles with multifunction steering wheel,
the multifunction display can only be operated
with the steering wheel buttons.
Some menu options can only be read when the
vehicle is at a standstill.
Instrument panel menus
The number of menus and information items
available will depend on the vehicle’s electron-
ics and features.
●
Vehicle status ›››page23.
●
Driving data ›››page22.
●
Assist systems.
–
Front Assist On/O ›››page171
–
ACC (only display) ›››page164
–
Lane Assist On/O ›››page174
–
Travel Assist ›››page176
–
Side Assist On/O ›››page181
–
Speed warning On/O ›››page29
●
Navigation.
●
Audio.
●
Telephone.
WARNING
Distracting the driver in any way can lead to
an accident and cause injuries.
●
Never use the menus on the instrument
panel display while the vehicle is in motion.
NOTICE
After charging or changing the 12-volt bat-
tery, check the system settings. If the power
supply is interrupted, the system settings
might be incorrect or deleted.
Operation using the multifunction
steering wheel
As long as a priority 1 ›››page23 warning
is active, it will not be possible to access any
menu. Some warnings can be confirmed and
hidden with the button of the multifunction
steering wheel.
Select a menu or an informative display
●
Switch the ignition on.
●
If a message or vehicle symbol is displayed,
press the button; several times if necessary.
●
To change menus, use or buttons.
●
To open the menu or the information dis-
played, press the button or wait a few sec-
onds until the menu or the informative display
opens automatically.
Changing menu settings
●
In the menu displayed, turn the right thumb-
wheel of the multifunction steering wheel until
the desired option of the menu is highlighted.
The option appears framed.
●
Press the button to make the required mod-
ifications. A mark indicates that the system or
function is activated.
Back to menu selection
●
Press the or button.