EasyManua.ls Logo

Seat ATECA 2024 - Top Tether Securing Belts

Seat ATECA 2024
381 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety
61
Transporting children safely
WARNING
The securing rings are designed only for use
with ISOFIX or i-Size and Top Tether system
child seats.
Never secure other child seats that do not
have ISOFIX, i-Size or Top Tether systems, or
safety belts or any other objects to the se-
curing rings – as this can result in potentially
fatal injuries to the child.
Ensure that the child seat is correctly se-
cured to the ISOFIX or i-Size rings and the Top
Tether.
Top Tether securing belts
Fig.38 Rear part of the rear seats: securing
rings for the Top Tether belt.
Child seats with a Top Tether system are fitted
with an additional belt for fastening to an an-
chor point in the vehicle. This anchor point is
located on the rear of the rear seat backrest
(identified with the symbol ) and provides
better retention ›››Fig.38.
The objective of this system is to reduce for-
ward movements of the child seat in a head-on
collision, to reduce the risk of injuries that may
be caused to the child’s head by impacting
against any element of the inside of the vehicle.
Use of Top Tether on rear-facing child re-
straints
Currently, there are very few rear-facing child
restraints with Top Tether. The car seat manu-
facturer's instructions for proper installation of
the Top Tether should be read carefully and
followed.
Locking the tether belt
Fig.39 Rear seats: adjustment and assembly
according to the Top Tether belt.
Deploy the Top Tether belt according to the
child seat manufacturer’s instructions.
Position the belt under the headrest (accord-
ing to the instructions of the seat itself, lift or
remove the headrest if necessary) ›››Fig.39.
Slide the belt and secure it properly with the
anchor on the rear seat backrest ›››Fig.38.
Tighten the belt securely according to the
manufacturer’s instructions.
Release the tether belt
Loosen the belt according to the manufactur-
er’s instructions.
Press the lock and release it from the anchor
bracket.
WARNING
Installing safety seats incorrectly will in-
crease the risk of injury in the event of a colli-
sion.
Never attach the tether belt to a fastening
hook in the luggage compartment.
Never attach or secure luggage or other
items to the lower anchor points (ISOFIX) or
Top Tether anchor points.

Table of Contents

Related product manuals