NOTICE
The printed antenna structure on the rear
and side windo
ws can be damaged by ob-
jects rubbing against it or by the use of
corrosive products, or products containing
acids.
●
Do not apply any stickers to the rear and
side windo
w areas.
●
Never clean the antenna structure with
corr
osive or acidic products.
Information on the
EU chemicals regulation
REACH
In accordance with the European Chemicals
Regulation REACH, SEAT, S.A. has information
on the substances that may be contained in the
vehicle.
You can ask any SEAT dealer for this informa-
tion.
Materials and recycling in-
f
ormation
Environmental compatibility
Environmental protection is a top priority in the
design, choice of materials and manufacture of
your new SEAT.
Constructive measures to encourage recy-
cling
●
Joints and connections designed for easy
dismantling.
●
Modular construction to facilitate disman-
tling.
●
Increased use of single-grade materials.
●
Plastic parts and elastomers are marked in
accor
dance with ISO 1043, ISO 11469 and ISO
1629.
Choice of materials
●
Use of recycled materials.
●
Use of compatible plastics in the same part if
its components are not easily separated.
●
Use of recycled materials and/or materials
originating from renewable sources.
●
Reduction of volatile components, including
odour, in plastic materials.
●
Use of CFC-free coolants.
Ban on heavy metals, with the exceptions
dict
ated by law (Annex II of ELV Directive
2000/53/EC): cadmium, lead, mercury, hexa-
valent chromium.
Manufacturing methods
●
Reduction of the quantity of thinner in the
protective wax for cavities.
●
Use of plastic film as protection during vehi-
cle transport.
●
Use of solvent-free stickers.
●
Use of CFC-free coolants in cooling systems.
●
Recycling and energy recovery from residues
(RDF).
●
Improvement in the quality of waste water.
●
Use of systems for the recovery of residual
heat (thermal recovery, enthalpy wheels, etc.).
●
The use of water-soluble paints.
Recycling of electrical or electronic
devices
All electrical or electronic devices (EED) that
are not permanently fitted in the vehicle must
be marked with the following symbol:
This symbol indicates that EED must not be dis-
car
ded as home waste but through selective
waste collection.
To Next Page
Loading...
