Seats and head restraints
Fitting the rear head restraints
T
o mount the external head restraints, the cor-
responding backrest must be partially folded
forward.
●
Unlock the backrest ›››page85.
●
Insert the head restraint bars into the guides
until they perceptibly engage. It should not be
possible to remove the head restraint from the
backrest.
●
Move the backrest until it engages properly
›››
in F
olding down and raising the rear
seat backrest on page85.
WARNING
Remove the rear headrests only when it is
necessary t
o fit a child seat. After removing a
child seat, refit the headrest immediately.
To Next Page
Loading...
