YOUR VEHICLE AND THE ENVIRONMENT ––––––––––––––––––––––––––––––––––––––––––––––––––
3.17
TIPS AND MAINTENANCE
A
= 4 fixing points
B
= min. 65 mm.
C
= max. 60 mm.
All measurements are expressed in mil-
limeters.
The vehicle is designed mainly to carry
people and luggage. However it may also
be used to tow a trailer, as long as you fit
it with the technically appropriate equip-
ment and you do not exceed the maximum
authorised weights (see “Technical Data”
chapter).
Towing a trailer not only demands more
from the car, but from the driver too.
You should therefore strictly adhere to the
service and running-in instructions on the
following pages.
Technical requirements
•
If the trailer to be towed has a 7-pin
plug, an adapter cable can be used which
may be obtained in any Technical Service
Centre. Installation of a towing bracket at
a later stage should be carried out accord-
ing to the instructions of the towing
bracket manufacturer.
Warning
If a trailer is fitted at a later stage,
you should use the body reinforce-
ment set designed by SEAT.
Otherwise you may seriously dam-
age the body work.
Danger of accident!
To install the tow joint, we recom-
mend that you visit a Technical
Service Centre.
Tow bar fixing points* Trailer towing*
IN0-034
To Next Page
Loading...
