EasyManua.ls Logo

Seat Inca 2020 - Page 153

Seat Inca 2020
214 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TIPS AND MAINTENANCE
IF AND WHEN ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
3.55
Spare wheel
The spare wheel is secured under the rear
of the vehicle in a special hinged carrier.
Lowering spare wheel carrier
bracket
To gain acces to the spare wheel, proceed
as follows:
The wheel brace and screwdriver are:
behind the driver’s seat (van version)
at the rear of the luggage compartment,
stowed in the cover of the right side
panel (Kombi version).
With the aid of the screwdriver:
Remove the rubber cover (
A
) of the ori-
fice at the centre of the rear edge of the
load zone, avoiding damage to the paint-
work.
Using the wheel brace (
B
), loosen com-
pletely the securing bolt housed inside
the orifice; the wheel-carrier will descend
to allow the spare wheel to be removed.
On no account turn bolt too far, other-
wise the stop will be damaged and
the retaining hook and spare wheel
bracket could drop down.
IN0-048 IN0-049

Related product manuals