With the aid of the
belt height adjust-
ment
the routing of the shoulder belt for
the front and rear seats can be set to fit
the body properly.
•
To adjust, push the upper relay fitting
in the direction shown, hold in this posi-
tion and move up or down so that the
shoulder part of belt runs roughly across
the centre of the shoulder as shown in the
left-hand illustration –
on no account
against the neck.
•
After adjusting, pull the belt with a jerk
to ensure that the relay fitting is properly
engaged.
Note
The seat height adjustment* can also be
used to adjust belt routing on front seats.
Warning
Pregnant women should always
wear a seat belt too. The lap part
of the belt should be as low as
possible across the pelvis so that
no pressure is exerted on the
abdomen.
SEAT BELTS ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
1.11
SAFETY FIRST
B1H-131B7M-010C
To Next Page
Loading...
