LIGHTS AND VISIBILITY –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
2.27
HANDLING INSTRUCTIONS
Switches
Notes
•
On vehicles with righthand drive the
arrangement of the switches differs. The
symbols on the switches are however the
same as on vehicles with lefthand drive.
•
The use of the lighting described here
is subject to local regulations.
•
If lights, fog lights or indicators are not
switched off, and the ignition key has
been withdrawn, a buzzer* will sound
when the driver’s door is opened. The
buzzer stops when the driver’s door is
closed.
1 – Lighting switch
–
Switched off
–
Side lights
1)
A warning light comes on in the instru-
ment panel.
–
Dipped or main beam
The headlights only work when the igni-
tion is on. When the engine is being
started and after ignition has been
switched off, the headlights are switched
off automatically.
Dipping and flashing the headlights. See
the chapter on "Indicator lights and beam
dip lever".
–
Front fog lights*
With lighting switch in side light or
dipped/main beam position, pull switch
out to first detent.
To switch off the fog lights, press the
lighting switch inwards. The lights previ-
ously connected (side lights, dipper or
main beam) will remain on.
1)
On vehicles for some export countries, when
the side lights are switched on with the ignition
switched on, the dipped headlights also come
on with reduced intensity.
0
B11-030D
To Next Page
Loading...
