Adjustment of rear-view mirror
The rear-view mirrors should always be
adjusted properly before moving off so
that good vision to the rear is obtained.
Anti-dazzle inside mirror
The lever on the lower edge of the mirror
should be pointing to the rear when the
basic setting is made.
To set the anti-dazzle position, push lever
forwards.
Outside mirrors
The outside mirrors should de adjusted so
that the side of your own vehicle can just
be seen. This setting ensures the best
possible field of view, and in addition
serves as an instant check on the mirror
setting.
The exterior mechanically regulated
rearview mirrors can be adjusted:
–
from the interior*
, using the control
situated on the trim of the correspond-
ing door;
– by pressing on the edge of the mirrors.
IN0-020
2.36
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– LIGHTS AND VISIBILITY
HANDLING INSTRUCTIONS
Rear-view mirrors
To Next Page
Loading...
