SEATS AND STOWAGE –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
2.41
HANDLING INSTRUCTIONS
Head restraints*
The head restraints are height adjustable
and should be set to suit the size of the
person in the seat. Correctly adjusted
head restraints together with the seat-
belts offer effective protection. It is also
possible to set the angle of the front head
restraints.
Adjusting height
•
Grip sides of head restraint with both
hands and pull up or push down.
•
The best protection is obtained when
the upper edge of the restraint is at least
at eye level.
Removing and installing
To remove, pull restraint up to the stop,
press button (arrow) and at the same time
take restraint out.
The rear head restraints can only be
removed after the back seat backrest has
been folded forward slightly.
To install again, push the restraint rods
into the guides until they are heard to
engage.
B45-016CB1S-017P
To Next Page
Loading...
