Lights and visibility122
Note
• The automatic anti-dazzle function will only work properly if the sun
blind* for the rear window is retracted and there are no other objects
preventing light from reaching the interior mirror.
• If you have to stick any type of sticker on the windscreen, do not do so in
front of the sensors. Doing so could prevent the anti-dazzle function from
working well or even from working at all.
Exterior mirrors
The exterior mirrors can be adjusted using the rotary knob in
the centre console.
Basic setting of exterior mirrors
1. Turn knob ⇒ fig. 88 to position L (left exterior mirror)
2. Turn the rotary knob to position the mirror so that you have a
good view to the rear of the vehicle
3. Turn knob to position R (right exterior mirror)
4. Swivel the rotary knob to position the mirror so that you have a
good view to the rear of the car ⇒
Heating the exterior mirrors*
– Turn the knob forwards to the central position ⇒ page 122,
fig. 88 so that the heated rear view mirrors warm up and the
heated windscreen* in the wiper blade rest area is activated
⇒ page 118.
Folding in exterior mirrors*
– Turn the control ⇒ page 122, fig. 88 to position
to fold in the
exterior mirrors. You should always fold in the exterior mirrors if
you are driving through an automatic car wash. This will help
prevent damage.
Folding exterior mirrors back out to the extended position*
– Turn the knob to another position to fold the exterior mirrors back
out ⇒ .
Synchronised mirror adjustment
1. Turn the control to the position L (left exterior mirror)
2. Turn the rotary knob to position the mirror so that you have a
good view to the rear of the vehicle. The right exterior mirror will
be adjusted at the same time (synchronised)
Fig. 88 Exterior mirror
control
To Next Page
Loading...
