Air conditioning 137
Safety First Handling instructions Tips and Maintenance Technical Data
Air conditioning
Heating
Controls and equipment
– Using the controls ⇒ fig. 105 , and you can set the
temperature, air distribution and the air flow.
– To switch a function on or off, press the appropriate button or
. When the function is activated, the display window in the
lower left of the button is lit.
Temperature
Control for setting the temperature. The required temperature inside the
vehicle cannot be lower than the ambient temperature. Maximum heat
output, which is needed to defrost the windows quickly, is only available
when the engine has reached its operating temperature.
Rear window heating
This function will be switched off automatically approximately 20 minutes
after being switched on. It can also be switched off beforehand by pushing
the button.
Air recirculation mode
Air recirculation mode prevents strong odours in the outside air from
entering the vehicle interior, for example when passing through a tunnel or in
queuing traffic ⇒ .
Fig. 105 On the dash panel: Heater controls
To Next Page
Loading...
