Air conditioning140
Note
Please observe the general notes ⇒ page 146.
Heating and cooling the interior
Heating of the vehicle interior
– Turn the temperature selector ⇒ fig. 107 clockwise to select
the required temperature.
– Turn the blower switch to one of the settings 1-4.
– Use the air distribution control to guide the flow of air in the
required direction: (to the windscreen), (to the upper
body), (to the footwell) and (to the windscreen and to the
footwell).
Cooling the passenger compartment
– Switch on the air conditioner using the button ⇒ page 139,
fig. 106 .
– Turn the temperature selector anti-clockwise until the desired
cooling output is reached.
– Turn the blower switch to one of the settings 1-4.
Fig. 107 On the dash panel: Climate controls
To Next Page
Loading...
