Instruments and warning/control lamps
Do not r
estart the indicator between the
service int
erv
als, otherwise the information
displayed will be incorrect.
If the oil change service is reset manually, the
service interval display changes to a fixed
service interval, also in vehicles with Flexible
oil change service.
Note
●
The service message disappears after a
fe
w seconds, when the engine is started or
when
button is pressed on the wiper
lev
er, or the
button on the multifunction
steering wheel.
●
In vehicl
es with the LongLife system in
which the battery has been disconnected
for a long period of time, it is not possible to
calculate the date of the next service.
Therefore the service interval display may
not be correct. In this case, bear in mind the
maximum service intervals permitted
›››
page 357.
●
If you reset the display manually, the next
service interval will be indicated as in vehi-
cles with fixed service intervals. For this
reason we recommend that the service in-
terval display be reset by a SEAT author-
ised Dealer.
●
If the period of 48 months for an inspec-
tion at a specialised workshop of com-
pressed natural gas tanks (CNG) is excee-
ded, the vehicle may not working in this
mode.
Using the instrument panel
Intr
oduction
With the ignition switched on, it is possible to
read the differ
ent functions of the display by
scrolling through the menus.
In vehicles with multifunction steering wheel,
the multifunction display can only be operat-
ed with the steering wheel buttons.
Some menu options can only be read when
the vehicle is at a standstill.
WARNING
Distracting the driver in any way can lead
to an accident and cause injuries.
●
Nev
er use the menus on the instrument
panel display while the vehicle is in motion.
Note
After loading or changing the 12-volt bat-
tery, check the system settings. If the po
w-
er supply is interrupted, the system settings
might be incorrect or deleted.
Operation with the wiper lever
Fig. 84
Wiper lever: control keys.
As long as a priority 1
›
›
›
page 76 warning is
active, it will not be possible to access any
menu. Some warnings can be confirmed and
hidden with the button
›››
Fig. 84
1
.
Sel
ect a menu or an inf
ormativ
e display
●
Switch the ignition on.
●
If a message or vehicle symbol is displayed,
press button
1
; if necessary, several times.
●
To display the menus
›
›
›
page 74 or to re-
turn to the selection of menus from a menu or
from an informative display, hold down the
rocker button
2
.
●
To change from one menu to another, press
the upper or l
o
w
er part of the rocker switch.
●
To open the menu or the informative display
shown, press button
1
or wait a few seconds
»
87
To Next Page
Loading...
