Heating, ventilation and cooling
Temperature
Climatronic control
Fig.114 Schematic representation: air-
conditioning functions.
A
Climabar
Fixed bar at the bottom of the Infotainment Sys-
tem display ›››Fig.114
A
where the following
Air Conditioning functions are located:
Tapping on the numbers them-
selves opens a pop-up window for temper-
ature settings using the symbols or .
OR: use the touch zones
1
and
2
(blue /
red) to adjust the temperature of the Air
Conditioning ›››Fig.114.
Click on the symbol to change the heat
setting. To turn o the heating, press
the button until the light level is o. It
can also be controlled via the main Seats
menu ›››page149.
OR: the seat heating can be controlled by
tapping with two fingers at once on touch
zones
1
(for driver) and
2
(for passenger)
(depending on the equipment).
The defrost/demist function of the Cli-
matronic removes ice and condensation
from the windscreen. The air is dehumidi-
fied and the fan is set to high.
This function is also available on the light
control.
When this function is switched on, the rear
air conditioning remains switched o.
Press this to access the Air Conditioning
menu ›››page146.
Switches the heated window on or o
when the engine is running. It switches o
automatically after a maximum of 10 mi-
nutes. It should be switched o as soon
as the glass is demisted. To avoid possi-
ble damage to the battery, this function
may temporarily disconnect automatically
and come back on when normal operating
conditions are re-established.
This function is also available on the light
control.
Favourites (depending on the equipment)
With the exception of temperatures, seat heat-
ing, , and , all other buttons on the
Climabar are customisable:
1. Press and hold the button that you want
to configure. A box showing all the possible
options drops down.
2. Select one of these options. The button will
be configured with this option.
3. Close the box to return to the infotainment
menu.