NOTICE
●
Damage to the radiator grille, bumper,
wheel arch and vehicle underbody can mod-
ify the orientation of the sensors. This can af-
fect the parking aid function. Have the func-
tion checked by a specialised workshop.
●
A number plate or number plate holder
with dimensions that exceed the space for
the number plate, or a cured or deformed
number plate can cause false detections or a
loss of visibility for the sensors.
Note
●
In order to guarantee good operation, keep
the sensors clean, free of snow and ice, and
do not cover them with stickers or other ob-
jects.
●
If you use high-pressure or vapour equip-
ment for cleaning, do not apply it directly,
unless you do so very briefly, and always
keep a distance of more than 10 cm away.
●
Fitting certain accessories to the front of
the vehicle, such as a plate holder with ad-
vertising, may interfere with the operation of
the Park Assist.
Rear camera
Fig.132 On the rear bumper: location of the
rear assist camera.
A camera on the rear bumper aids the driver
when reverse parking or manoeuvring This pro-
vides support to the following function:
●
Rear View Camera ›››page238.
WARNING
Fitting a number plate frame may interfere
with the view shown on the screen, as it may
reduce the camera’s field of vision.
NOTICE
●
In order to guarantee good system opera-
tion, keep the cameras clean, free of snow or
ice, and do not cover them with stickers or
other objects.
●
Never use abrasive cleaning products to
clean the camera lens.
●
Do not use hot or warm water to remove
ice or snow from the camera lens. Doing so
could damage the camera.
Cruise control system
Introduction
The cruise control system (GRA) helps maintain
a constant speed set by you.
Speed range
The cruise control system is available when
driving in forward gear at a speed of over ap-
prox. 20km/h (15mph).
Temporarily switching o the cruise control
The saved speed can be exceeded at any time,
e.g. for overtaking. The cruise control is suspen-
ded during acceleration and is then resumed
with the saved speed.