1. Press the button on the multifunction
steering wheel.
2. Then select the Travel Assist option from
the menu.
Depending on the driving situation, the vehicle
switches to the following system statuses in
Travel Assist:
●
If the ACC was already regulating, Travel As-
sist maintains the current speed and the preset
distance to the vehicle in front.
When lane markings are detected, the vehicle is
also kept in the lane by steering movements.
●
If ACC was not already regulating, Travel As-
sist remains selected but in a passive status
(not regulating).
Press the button.
Travel Assist switches to the active system sta-
tus, depending on the driving situation.
The indicator lamp for the driving situation
lights up on the instrument cluster display. A
message is also displayed.
Interrupting regulation
1. Briefly press the button .
OR: press the brake pedal.
The set distance remains saved.
Switch to ACC or speed limiter
1. Press the button on the multi-function
steering wheel.
2. Then select the ACC or Limiter option from
the menu.
The vehicle switches from Travel Assist to
the ACC or speed limiter system status cor-
responding to the driving situation.
Making other adjustments
All other aspects of Travel Assist are controlled
like the ACC.
Using the lane change assist
Lane Change Assist uses the same sensor sys-
tem as Side Assist. Therefore, read the informa-
tion on Side Assist ›››page218 carefully and
observe the limits of the system and the notes
that it displays.
Activating the convenience turn signal on a mo-
torway, provided that the prerequisites are met
and no vehicles have been detected in the vi-
cinity, provides assistance when the vehicle is
changing lanes.
Prerequisites
Lane change assist is only available, depend-
ing on the vehicle's equipment, when driving
forwards on multi-lane motorways included in
the Infotainment system’s navigation data, and
when travelling faster than 90km/h.
Travel Assist must also be activated.
The convenience turn signals mode must first
be activated in the infotainment system’s vehi-
cle settings menu ›››page130.
Status display
Fig.146 On the instrument cluster screen:
lane change assist display (schematic
representation).
1
Adjoining lane highlighted: changing lanes
is possible on the respective side.
2
Arrows in the vehicle's own lane show
that the assisted lane changing function is
switched on.
●
Grey arrow: changing lanes to the re-
spective side of the lane is not possible.
●
White arrow: changing lanes to the re-
spective side of the lane is possible.
To Next Page
Loading...
