EasyManua.ls Logo

Seat LEON 2024 - Page 235

Seat LEON 2024
422 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Parking and manoeuvring
233
Park assist system (Park Assist)
Certain surfaces of objects and garments
do not reflect the ultrasound sensors' sig-
nals. The system cannot detect, at least cor-
rectly, these objects or people wearing such
clothes.
Ultrasound sensor signals may be aected
by external sound sources. In certain circum-
stances this may prevent them from detect-
ing people or objects.
The ultrasound sensors may have blind
spots in which obstacles and people are not
detected.
Monitor the area around the vehicle at all
times, since the ultrasound sensors do not
detect small children, animals or certain ob-
jects in all situations.
WARNING
Quick turns of the steering wheel when park-
ing or exiting a parking space with Park As-
sist can cause serious injury.
Do not hold the steering wheel during ma-
noeuvres to park or exit a parking space un-
til the system requests it. Doing so disables
the system during the manoeuvre, resulting
in the parking being cancelled.
NOTICE
In certain circumstances, the ultrasonic
sensors do not detect objects such as trailer
hitches, bars, fences, posts or thin trees, or
an open (or opening) rear lid, which could
damage the vehicle.
Retrofitting of certain accessories to the
vehicle, such as a bicycle rack, may interfere
with the operation of the Park Assist system
and cause damage.
The Park Assist system uses as a reference
parked vehicles, kerbs and other objects.
Make sure that the tyres and wheels are not
damaged while parking. If necessary, inter-
rupt the parking manoeuvre on time to avoid
damaging the vehicle.
The ultrasound sensors on the bumper may
be damaged or shifted in the event of a colli-
sion, for example, when entering or exiting a
parking space.
If you use high-pressure or steam equip-
ment to clean the ultrasound sensors, do not
apply it directly unless very briefly and al-
ways from a distance of more than 10 cm.
A registration plate or plate holder on the
front that is larger than the space for the reg-
istration plate, or a registration plate that is
curved or warped can cause:
False detections.
The sensors to lose visibility.
Cancellation of the parking manoeuvre
or defective parking.
If one of the ultrasonic sensors is dam-
aged, the area corresponding to that group
of sensors (front or rear) is deactivated and
cannot be activated until the fault is correc-
ted. However, you can still use the sensors
of the other bumper as per usual. If there
is a fault in the system, consult a specialist
workshop. SEAT recommends visiting a SEAT
dealership for this.
Note
In order to guarantee good system oper-
ation, keep the ultrasound sensors of the
bumper clean, free of snow or ice, and do not
cover them with stickers or other objects.
Certain sources of noise, such as rough as-
phalt or paving stones and the noise of other
vehicles can induce the Park Assist system
or ParkPilot to give erroneous warnings. The
presence of metal objects can also aect
the manoeuvre.
To become familiar with the system and its
functions, SEAT recommends that you prac-
tice operating the Park Assist system in an
area where there is not too much trac or in
a car park.

Table of Contents

Related product manuals