Park assist system (Park Assist)
When the Park Assist system turns the steer-
ing wheel with the vehicle stationary, the instru-
ment panel also displays the symbol . Keep
the brake pedal depressed while the symbol
remains on the dash panel display to turn the
wheels with the vehicle stopped. This way, the
system will require fewer manoeuvres to com-
plete the parking action.
Trailer mode
The Park Assist system cannot be switched on if
the factory-fitted towing bracket is electrically
connected to a trailer.
After changing a wheel
If, after changing a wheel, the vehicle stops
entering and exiting parking spaces correctly,
the circumference of the new wheel may be
dierent and the system may need to adapt to
it. The adaptation is automatic and takes place
during driving. Making turns slowly and in both
directions (20 km/h [12 mph]) for a few minutes
may contribute to this adaptation process.
Selecting a parking type
Fig.155 On the infotainment system display:
parking modes indication.
Park assist has the following 6 parking types:
Reverse parallel parking.
Reverse angle parking.
Forward angle parking.
Reverse parallel parking without driving
past first: “Help me”.
Forward parking in a parking bay without
driving past first.
Reverse parking in a parking bay without
driving past first.
Selecting a parking type after passing in
front of the space
After activating the Park Assist system and af-
ter detecting a parking space, the instrument
cluster display proposes a parking type. The
Park Assist system selects the parking type au-
tomatically. The selected type is shown on the
instrument cluster display ›››Fig.155 and on
the Infotainment System display.
●
The necessary conditions to park with Park
Assist have to be met ›››page234.
●
Press the button in the infotainment system,
> Assistants.
●
When the system is switched on, the symbol
on the infotainment system display is highligh-
ted . Additionally, the selected parking type
is shown on the instrument cluster display. You
can change the type of parking on the infotain-
ment system display.
●
If there are more spaces available, another
space can be selected by clicking on it on the
infotainment system display.
●
Follow the instructions shown on the instru-
ment cluster display while paying attention to
trac and drive the vehicle past the parking
space.
Reverse parallel parking without driving
past first (type
)
With this type of parking , press button
so that the system completes the parking that
has already been started. The system will only
To Next Page
Loading...
