The main menu contains function buttons for
accessing all of the Infotainment apps.
Configuring customised menus
At the top of the screen you will find shortcuts
to customisable system functions. Use the set-
tings to delete or replace them, or change their
order.
●
Press and hold one of the icons (or press on
the icon of an empty position) to display an
additional window.
●
Select one of the icons from the apps bar.
●
Click on the three dots and then Delete fa-
vourite to delete an icon.
●
Click on an icon in the additional window to
replace the value.
●
To close the edit mode, press Finish in the
additional window.
Settings (system and sound)
The selection of possible settings varies de-
pending on the country, the equipment in ques-
tion and the equipment of the vehicle.
Modifying settings
The meaning of the following symbols are valid
for all system and sound settings.
All changes are automatically applied when
the menus are closed.
/
The setting is selected and activated
or connected.
/
The setting is not selected, disabled or
disconnected.
To open a drop-down list.
To increase a setting value.
To reduce a setting value.
To go back step by step.
To go forward step by step.
To change a setting value with the
scrollable button without adjusting.
Sound settings
●
Access the sound settings: > .
In the sound settings there may be the following
functions, information and setting options:
●
Equaliser.
●
Position.
●
Settings.
System settings
●
Access the system settings: > .
In the system settings there may be the follow-
ing functions, information and setting options:
●
Screen.
●
Time and date.
●
Language.
●
Additional keypad languages.
●
Units.
●
Voice control.
●
Wi-Fi.
●
Data connection.
●
Manage mobile devices.
●
Reset factory settings.
●
System information.
●
Copyright.
●
Configuration wizard.
Adjust the volume of external audio sources
If you need to increase the playback volume for
the external audio source, first lower the volume
on the infotainment system.
If the sound from the connected audio source
is very low, increase the output volume on
the external audio source. If this is not enough,
change the input volume to medium or high.
If the sound from the connected external audio
source is too loud or distorted, lower the out-
put volume on the external audio source. If this
is not enough, change the input volume to me-
dium or low.
To Next Page
Loading...
