1)
It only includes the wireless charge functionality.
Connectivity Box
Fig.176 On the centre console: pad for the
mobile phone connection.
The Connectivity Box includes dierent func-
tions that will help to use your mobile device.
These are:
●
Wireless Charger
1)
.
●
Mobile Signal Amplifier.
Wireless charger
If your mobile device is equipped with induction
charging (Qi) technology, it can be charged
wirelessly.
To charge your mobile phone wirelessly:
●
Place your mobile device in the middle of
the pad with the screen facing up ›››Fig.176 ,
››› .
Make sure there are no objects between the
pad and the mobile phone.
The mobile phone will start charging automat-
ically. For further information about whether
your mobile device uses Qi technology, check
your phone's user manual or visit the SEAT
website
Mobile Signal Amplifier
This reduces radiation in the vehicle and gives
you better reception.
For safety reasons, it is recommended that
you pair the system and the mobile using Blue-
tooth® and place it on the Connectivity Box
pad, for the best reception without having to
handle the mobile phone.
For connection to the vehicle’s external an-
tenna:
●
Place your mobile device in the middle of
the pad with the screen facing up ›››Fig.176 ,
››› .
Make sure there are no objects between the
pad and the mobile phone.
Your mobile phone will automatically be able to
use the external antenna function.
WARNING
Notifications
on the screen of the mobile de-
vice can distract the driver’s attention and
increase the risk of a serious accident.
●
Only place one suitable mobile device,
with Qi compatibility if applicable. To ensure
that it operates properly, place it without
the protective case and ensure that it has
maximum dimensions (width x length) of 80 x
140 mm (3.15 x 5.512 inches) on the base of
the Connectivity Box as indicated.
●
If the mobile device is not placed on the
base of the Connectivity Box, in the correct
position, or if its dimensions exceed those
specified, it may not be recognised or may
not charge correctly. Under certain circum-
stances, the infotainment system indicates
that there is a foreign object in the storage
compartment. Using a suitable mobile phone
device and correcting its position can elimi-
nate the fault.
WARNING
●
The mobile phone may become warm due
to wireless charging. Think about this before
you pick it up, and take care when removing
it.
●
There must be no metallic or other objects
between the mobile phone and the housing,
to prevent the functionality of the Connectiv-
ity Box from being aected.
To Next Page
Loading...
