Seat LEON 2024 - Page 69

Safety
67
Transporting children safely
●
IB: Seat suitable for installing an ISOFIX forward-facing group 2/3 booster seat as well as an i-size forward-facing child seat for children with a height
of 100 to 150cm.
●
X: Position not suitable for ISOFIX or i-Size child restraint systems in this weight group or size class.
Securing the child seat with the ISOFIX or
i-Size system
Fig.40 Rear seat: pre-punched slots to
access the ISOFIX / iSize securing rings.
Fig.41 Front passenger seat: location of the
i-Size securing rings.
Fig.42 Rear seats: fitting a child seat with the
ISOFIX system.
You must follow the child seat manufacturer's
instructions.
The location of the ISOFIX or i-Size anchor
points is indicated by a symbol ›››Fig.40 ,
›››Fig.41. In some vehicles, the rings are se-
cured to the seat frame and, in others, they are
secured to the rear floor.
●
First open the cut-out section behind the
marked grooves to access the securing rings
›››Fig.40.
●
Press the child seat onto the ISOFIX or iSize
securing rings until it is heard to engage se-
curely ›››Fig.42. If the child seat is equipped
with Top Tether anchor points, secure it to the
correspondent ring ›››page68. Follow the
child seat manufacturer’s instructions.
●
Pull on both sides of the child seat to ensure
that it is properly anchored.
Child seats with the ISOFIX or i-Size and Top
Tether attachment system can be purchased
from technical services.
WARNING
The securing rings are designed only for use
with ISOFIX or i-Size and Top Tether system
child seats.
●
Never secure other child seats that do not
have ISOFIX, i-Size or Top Tether systems, or
safety belts or any other objects to the se-
curing rings – as this can result in potentially
fatal injuries to the child.
●
Ensure that the child seat is correctly se-
cured to the ISOFIX or i-Size rings and the Top
Tether.