229Description of specifications
Vehicle identification data
Fig. 159 Vehicle data la-
bel:
Fig. 160 Vehicle identifi-
cation number.
Vehicle identification number
The vehicle identification number (chassis number) can be read from out-
side the vehicle through a viewer in the windscreen
⇒
Fig. 160. This viewer
is located in the lower part of the windscreen. The vehicle identification
number (chassis number) is also stamped on the right water drain channel.
The water drain channel is located between the suspension tower and the
wing. Open the bonnet to read the vehicle identification number .
Vehicle data plate
The vehicle data label ⇒ Fig. 159 is at the front of the spare wheel well. It
contains the following data:
Vehicle identification number (chassis number).
Vehicle type, engine power, gearbox type.
Engine and gearbox code, paint number, interior equipment.
Optional extras, PR numbers.
These data are also provided in the Maintenance Programme.
Specific vehicle weight information
The instructions in the official vehicle documents take precedence. All the
technical data provided in this documentation is applicable to the basic
model. The vehicle data label in the Maintenance Programme or the vehicle
documentation shows which engine is installed in your vehicle.
The figures may be different depending whether additional equipment is fit-
ted, for different models and for special vehicles.
Kerb weight values shown in the following table apply for a vehicle with
driver (75 kg), liquids including a fuel tank 90% full, in addition to tools and
a spare wheel ⇒
. The kerb weight indicated increases with optional
equipment and retrofitting of accessories, while proportionally reducing car-
rying capacity.
The load is equivalent to the following weights:
● Passengers.
● Total equipment.
● Roof load, included in the carrier.
1
2
3
4
Safety Operation Advice Technical specifications
To Next Page
Loading...
